Was this sample helpful? Rate it!
Average: 4.9 (39 votes)
Contents
Key Takeaways for an Electrical Maintenance Engineer Resume
Why This Electrical Maintenance Engineer Resume Works
How to Write an Electrical Maintenance Engineer Resume That Gets Interviews
What to Include in an Electrical Maintenance Engineer Resume
Electrical Maintenance Engineer Resume Summary Examples
Electrical Maintenance Engineer Work Experience Examples
Top Electrical Maintenance Engineer Skills
Key Certifications & Licences for an Electrical Maintenance Engineer
Electrical Maintenance Engineer Salary
Common Electrical Maintenance Engineer Resume Mistakes
Electrical Maintenance Engineer Resume FAQs
Summary
Electrical maintenance engineer with thirteen years keeping production plant and machinery running across manufacturing sites in Manchester. Carries out planned and reactive maintenance on motors, drives, PLCs, control panels and power distribution, diagnoses electrical faults fast, and minimises downtime on the line. Led a planned-maintenance programme that significantly cut unplanned electrical breakdowns across the factory. Works on 3-phase systems, variable-speed drives, PLC and control systems, and follows strict electrical safety, isolation and compliance standards. Strong fault-finder under pressure when a line is down, and methodical on planned work and improvements. Holds the relevant electrical qualifications and works safely around high-voltage plant. Looking for an electrical-maintenance or multiskilled-engineer role with a manufacturer that values uptime and safety.
Work Experience
Electrical Maintenance Engineer
Greater Manchester Manufacturing, Manchester, UK
Apr 2015 – Present
- Carry out the planned and the reactive maintenance on motors, drives, PLCs and control panels.
- Led a planned-maintenance programme that significantly cut the unplanned electrical breakdowns right across the factory.
- Diagnose the electrical faults fast to minimise all the downtime whenever a production line stops.
- Work on the 3-phase power, the variable-speed drives and all the PLC and control systems.
- Follow the strict electrical safety, the isolation and the compliance standards on every single job.
- Improve the overall plant reliability through the condition monitoring and the proper preventive maintenance work.
Maintenance Electrician
North West Industrial Services, Manchester, UK
Aug 2010 – Mar 2015
- Maintained and repaired the electrical systems across several busy industrial sites daily.
- Supported the breakdown response and the planned maintenance schedules on each shift.
- Learned the PLCs, drives and industrial control systems on the job.
- Gained the PLC and the wiring-regulations certification and then an engineer role.
Apprentice Electrician
North West Industrial Services, Manchester, UK
Jun 2007 – Jul 2010
- Completed a four-year electrical apprenticeship across installation and industrial plant maintenance.
- Learned the wiring, the fault-finding and safe working on the job.
- Built up the core electrical skills the trade is built on.
- Qualified and then moved into a full maintenance-electrician role from there.
Education
Level 3 Diploma in Electrical Engineering, Electrical Engineering
Manchester College of Engineering
Sep 2007 – Jun 2010
- Electrical engineering diploma and apprenticeship covering power, motors, controls and maintenance, with on-site hours. The apprenticeship built real plant experience. Established the qualified-engineer foundation the role requires.
PLC Programming & 18th Edition Wiring Regulations, Industrial Electrical
City & Guilds
Jan 2015 – Jun 2015
- Certification in PLC programming and the 18th Edition wiring regulations covering controls and electrical safety. It widened the work into automation. Applied directly to PLC fault-finding and compliant maintenance.
Certifications
PLC & 18th Edition Wiring Regs
City & Guilds
Jun 2015 – Present
- Certification in PLC programming and the 18th Edition wiring regulations covering controls and electrical safety. It widened the work into automation. Applied directly to PLC fault-finding and compliant maintenance.
Variable-Speed Drives & Condition Monitoring
EAL
Apr 2019 – Present
- Certification in variable-speed drives and condition-monitoring techniques. It supports the drive maintenance and the preventive, reliability-focused work carried out across the factory.
Highlights
Fewer breakdowns
- Led a planned-maintenance programme that significantly cut unplanned electrical breakdowns across the factory. Preventing failures before they stop the line is worth far more than fast repairs after.
Fast when it's down
- Finds and fixes electrical faults quickly when a production line has stopped and pressure is high. Getting the line moving again fast directly protects output and cost.
Major Jobs
Variable-Speed Drive Upgrade
Jan 2019 – Jul 2019
- Led the upgrade of ageing motor drives to modern variable-speed units across the line, improving energy use and control while cutting the breakdowns the old drives caused.
Control-Panel Rebuild
Mar 2020 – Apr 2020
- Designed and rebuilt a failing control panel during a shutdown, rewiring and re-terminating to standard so the line came back stable and far easier to fault-find.
Languages
- English (UK) — Native or Bilingual Proficiency
- Polish — Limited Working Proficiency
Technical Skills
- Electrical Maintenance
- Fault Diagnosis
- PLC Systems
- Variable-Speed Drives
- 3-Phase Power
- Control Panels
- Planned Maintenance
- Electrical Safety & Isolation
- Motors & Distribution
- Condition Monitoring
Personal Skills
- Problem Solving
- Composure
- Safety Focus
- Reliability
- Methodical Approach
Activities & Interests
- Drinking
- Cinema
- Shooting
- Grow Moustache
- Shopping
Key Takeaways for an Electrical Maintenance Engineer Resume
Before the detail, here is what actually decides whether a maintenance manager shortlists you:
- Downtime is the currency. Quantify breakdowns cleared, mean time to repair and line availability, not the number of machines on site.
- Name the control platform. Siemens S7, Allen-Bradley ControlLogix, Mitsubishi, ABB and Danfoss drives are the words a maintenance manager scans for first.
- Show planned work beating reactive work. A PM programme that cut unplanned electrical failures outranks any story about a fast repair.
- Compliance is a hiring gate in the UK and EU. 18th Edition, inspection and testing, safe isolation and ECS or equivalent belong high on the page.
- Reliability metrics separate engineers from technicians. MTBF, MTTR and PM completion percentage signal you own the asset, not just the callout.
- One or two improvement projects, costed and dated, prove you can specify and commission work rather than only maintain what is already there.
Why This Electrical Maintenance Engineer Resume Works
The sample above belongs to a Manchester manufacturing engineer with thirteen years on plant. These are the structural choices worth copying:
- The summary opens with scope, not credentials: production plant and machinery kept running across manufacturing sites. A maintenance manager sees the environment in the first line and reads on.
- Equipment is named explicitly across the summary and the experience, so motors, variable-speed drives, PLCs, control panels and power distribution all appear as searchable terms rather than being hidden under the word maintenance.
- The strongest bullet is the planned-maintenance programme that cut unplanned electrical breakdowns. Reducing failures is worth more to an employer than being quick after one, and the resume leads with that order of priority.
- The career story is left to the dates: apprentice, then maintenance electrician, then engineer. Progression through the trade is shown rather than claimed, which is far harder to argue with.
- Safety and isolation sit inside the day-to-day bullets instead of in a bolted-on statement, which reads the way a working engineer talks about permits and lock-off.
- Two project entries, a variable-speed drive upgrade and a control-panel rebuild, give dated evidence of improvement work and stop the resume reading as pure breakdown cover.
Extra tips
Most maintenance managers look for the control platform and the voltage before anything else.
Put Siemens, Allen-Bradley, 400V or 11kV in the summary line, not buried in a skills box at the bottom.
How to Write an Electrical Maintenance Engineer Resume That Gets Interviews
Maintenance managers read for two things: can this person find the fault, and will they stop it coming back. Structure the page around that.
Open with the plant you keep running, not your job title
The first line should tell the reader the environment and the scale. "Electrical maintenance engineer covering a three-shift FMCG site with 12 packaging lines and 400V distribution" says more than any adjective. Add the shift pattern if it is a selling point, because 24/7 and on-call cover are exactly what hard-to-fill roles need.
Put a downtime number in the top third of the page
Give one figure a maintenance manager can compare against their own site: mean time to repair in minutes, line availability as a percentage, or breakdown hours per month before and after your work. If nothing was measured formally, use what you can defend, such as callouts per week or the number of repeat failures you closed out permanently.
Separate reactive fault-finding from planned and improvement work
Recruiters can tell within seconds whether you only respond to breakdowns. Give reactive diagnosis its own bullets (symptoms, method, tools), then a distinct set for PM strategy, condition monitoring and asset replacement. That split is the clearest signal you sit at engineer level rather than technician level.
Name platforms and voltages, precisely
Write Siemens S7-1200 and TIA Portal, Allen-Bradley ControlLogix and Studio 5000, ABB ACS580 or Danfoss FC302 drives, 400V three-phase, 11kV HV switching if you hold an authorisation. Vague phrasing like "PLC systems" loses keyword matches and tells an interviewer nothing about what you can walk up to unsupervised.
Show the method, not just the outcome
One diagnostic bullet should reveal how you think: thermal imaging on a distribution board, insulation resistance testing on a suspect motor winding, reading drive fault codes and trend data before touching anything. Interviewers use these lines to build their technical questions, so give them the ground you want to be tested on.
Make compliance and authorisations easy to find
18th Edition (BS 7671), City & Guilds 2391 inspection and testing, ECS card, CompEx for hazardous areas, LV or HV authorised person status, IOSH or NEBOSH. Put them in a dedicated block near the top rather than at the foot of page two, because for many UK and EU employers these are pass or fail filters.
If you would rather see the layout before you write, build the page in a template that already separates plant experience, projects and certifications: use our free resume builder and drop your own numbers in.
What to Include in an Electrical Maintenance Engineer Resume
Beyond the standard blocks, these are the sections that carry real weight for plant roles:
An equipment and controls line near the top: PLC families, drive manufacturers, HMI and SCADA packages, motor sizes and distribution voltages you work on unsupervised.
Authorisations stated plainly, including LV or HV authorised person, permit issuer, confined space or working at height where the site demands it.
A CMMS or maintenance system line (SAP PM, Maximo, Agility, Fiix), because the person hiring you wants planned work recorded, not just done.
A short projects block for upgrades, panel rebuilds, drive retrofits or new line commissioning, each with a date range and what changed as a result.
Reliability metrics you have owned or reported: MTBF, MTTR, PM completion, OEE contribution from electrical losses.
Shift pattern, on-call availability and driving licence, which quietly decide whether a plant recruiter can even progress the application.
Any technician development you have led, since senior maintenance roles increasingly expect you to raise the skill level of the shift team.
Electrical Maintenance Engineer Resume Summary Examples
Each of these is written for a different plant environment, so borrow the structure and swap in your own equipment and figures:
Mid-level resume summary example
Electrical maintenance engineer with eight years on 24/7 manufacturing sites, covering motors, variable-speed drives, PLCs, control panels and 400V distribution. Diagnoses breakdowns from alarm history, drive fault codes and insulation resistance results rather than by swapping parts, and has held mean time to repair under 45 minutes across twelve packaging lines. Rebuilt a preventive maintenance schedule covering 140 motors and 60 drives so that most electrical work now falls into planned shutdown windows instead of reactive callouts. Holds 18th Edition and City & Guilds 2391, and works to safe isolation and permit standards without exception. Seeking a plant engineering role where uptime and asset condition are measured seriously.
Senior-level resume summary example
Senior electrical maintenance engineer with fifteen years in continuous process and heavy manufacturing, responsible for the electrical reliability of a site running 1,200 circuits, HV intake and 45 critical drives. Owns the fixed wire testing and thermographic survey programme to BS 7671, and has lifted planned maintenance compliance from 68 to 94 percent while cutting unplanned electrical downtime by a third. Leads root-cause analysis on repeat failures, presents MTBF and MTTR trends at the weekly reliability review, and costed a five-year switchgear and MCC replacement plan that secured capital funding. Authorised person for LV switching, CompEx certified, and experienced in developing multiskilled technicians into confident PLC fault-finders.
Mid-level resume summary example
Multiskilled maintenance engineer with nine years in food and beverage production, biased towards electrical work on Siemens S7 and Allen-Bradley control systems, servo-driven fillers and high-care conveying. Provides first-line electrical cover on a three-shift pattern, restoring production on the majority of breakdowns without escalating to external contractors, and holds hygiene and allergen discipline through every repair on the line. Commissioned a labelling head upgrade including ladder logic and HMI changes that let operators clear minor stops themselves, removing roughly a third of engineer callouts. Comfortable with drive parameter setup, sensor and safety-circuit fault-finding, and BRC audit evidence for electrical maintenance records.
Electrical Maintenance Engineer Work Experience Examples
Three different plant contexts, written the way strong maintenance bullets actually read: equipment, method, number, result.
High-speed manufacturing and FMCG plant engineer
- Diagnosed and cleared electrical faults on high-speed packaging lines averaging 18 breakdown calls a week, holding mean time to repair under 42 minutes and protecting roughly 96 percent line availability across the year.
- Rebuilt the preventive maintenance schedule for 140 motors and 60 variable-speed drives inside the CMMS, moving 70 percent of electrical work from reactive callouts into planned shutdown slots within nine months.
- Traced an intermittent trip on a 400V distribution board to a failing contactor coil using thermal imaging and insulation resistance testing, ending a fault that had stopped the line eleven times in six weeks.
- Programmed and commissioned Siemens S7-1200 changes for a new labelling head, writing the ladder logic and HMI screens so operators cleared minor stops themselves and engineer callouts fell by around a third.
- Ran safe isolation and lock-out tag-out for every electrical task across the 24/7 site, closing 100 percent of permit audits with no reportable electrical incident across three consecutive production years.
Continuous process and heavy industry shift engineer
- Held first-line electrical cover on a three-shift continuous process plant, responding to control-system alarms inside 10 minutes and restoring production on 8 of every 10 breakdowns without calling in contractors.
- Replaced ageing soft starters with 132kW variable-speed drives on the main extraction fans, cutting motor energy draw by about 19 percent and removing the damper failures behind repeated overnight stoppages.
- Led root-cause analysis on the top five recurring electrical failures each quarter, taking findings to the reliability review and lifting mean time between failures on the worst asset from 21 days to 63 days.
- Inspected and maintained hazardous-area electrical equipment to Ex standards across a zoned site, completing the annual inspection schedule on 320 items and closing every grade A defect inside 14 days.
- Supervised two maintenance technicians on shift, allocating breakdown and planned work, countersigning isolations and coaching them through drive parameter changes until they commissioned units unaided.
Senior engineer with reliability and compliance ownership
- Owned the site electrical compliance programme covering fixed wire testing to BS 7671, thermographic surveys and RCD testing, keeping all 1,200 circuits inside their inspection interval ahead of an insurer audit.
- Built a condition-monitoring routine using vibration and thermal data on 45 critical drives, catching seven bearing and winding failures before breakdown and avoiding an estimated 60 hours of unplanned downtime.
- Wrote and costed the five-year electrical asset replacement plan for switchgear and MCCs, securing 480,000 pounds of capital and phasing works across shutdowns so no scheduled production output was lost.
- Chaired the weekly maintenance review with production and quality, tracking MTBF, MTTR and PM completion against target and raising planned maintenance compliance from 68 percent to 94 percent in one year.
- Trained four multiskilled technicians in PLC fault-finding and drive diagnostics, cutting the share of overnight electrical breakdowns escalated to the on-call engineer from 55 percent to under 20 percent.
Top Electrical Maintenance Engineer Skills
Write these as things you do on plant, not as a word cloud. The hard list is what gets you past the filter; the soft list is what gets you through the shift.
Hard skills
- Electrical fault diagnosis on live production plant
- PLC fault-finding (Siemens S7, TIA Portal, Allen-Bradley Studio 5000)
- Variable-speed drive setup and diagnostics (ABB, Danfoss, Schneider)
- Three-phase motors, starters and motor control centres
- Control panel wiring, modification and rebuild
- LV distribution and switchgear maintenance
- HV switching and authorised person duties
- Safe isolation, lock-out tag-out and permit to work
- 18th Edition BS 7671 wiring regulations
- Inspection, testing and certification (fixed wire, RCD, earth loop)
- Thermographic surveying and thermal imaging
- Insulation resistance and continuity testing
- Condition monitoring and vibration analysis
- Planned preventive maintenance strategy and scheduling
- Root cause analysis and repeat-failure elimination
- CMMS administration (SAP PM, Maximo, Agility)
- Instrumentation, sensors and safety circuit maintenance
- HMI and SCADA fault interrogation
- Reliability metrics: MTBF, MTTR, PM compliance
- Reading and marking up electrical schematics and single-line diagrams
Soft skills:
- Composure during a line-down call
- Methodical elimination under time pressure
- Clear handover across shifts
- Coaching technicians
- Working with production without being pushed into unsafe shortcuts
- Written fault reporting
Key Certifications & Licences for an Electrical Maintenance Engineer
For UK and EU plant roles some of these are screening gates rather than nice extras, so state the level and the year you achieved it:
-
18th Edition Wiring Regulations
— City & Guilds Effectively required for UK electrical maintenance work. Recruiters check the amendment you sit under, so give the year.
-
City & Guilds 2391
— City & Guilds Optional but strongly rewarded. It is what lets you sign off fixed wire testing rather than only assist with it.
-
ECS Card
— JIB Required for site access on most UK industrial and construction-adjacent work. State the grade you hold.
-
CompEx
— CompEx Certification Required for petrochemical, food-dust and other zoned sites. A genuine differentiator on process plant applications.
-
IOSH Managing Safely
— IOSH Optional. Expected once you are supervising technicians or issuing permits rather than only receiving them.
-
Authorised Person (LV or HV)
— Site or employer appointment, assessed to national standards Not a college certificate, but list it. It tells a maintenance manager you can switch and issue permits on their network.
Electrical Maintenance Engineer Salary
Pay tracks shift pattern, sector and authorisations far more than job title, and hazardous-area or HV competence adds a clear premium. The figures below come from official US and UK occupation data:
USD 45,000 – USD 56,000 · entry · US
Around and below the 25th percentile, typical of a time-served electrician moving into a plant maintenance post.
USD 57,000 – USD 78,000 · mid · US
Spans the occupation median of roughly 67,000 dollars in the May 2024 release.
USD 80,000 – USD 100,000 · senior · US
Upper-decile territory, usually reliability-focused or lead engineer roles with controls and HV responsibility.
GBP 34,000 – GBP 45,000 · mid · UK
Within the published starter to experienced band of 27,000 to 48,000 pounds; continental shift allowances sit on top.
GBP 46,000 – GBP 58,000 · senior · UK
Above the published experienced figure, generally CompEx or HV authorised roles on chemical, pharma and energy sites.
Common Electrical Maintenance Engineer Resume Mistakes
These are the errors that get plant applications filtered out, and none of them are about typos:
- Listing equipment instead of faults. A page of manufacturer names with no diagnostic story reads like an inventory, and interviewers cannot tell what you can actually fix alone.
- Writing the resume as pure breakdown response. If nothing in it shows PM strategy, condition monitoring or failure elimination, you will be read as a technician applying for an engineer's job.
- Burying 18th Edition, 2391 and ECS at the bottom of page two, where the screening filter that was built to look for them never reaches.
- Skipping the shift pattern. Plant recruiters need to know whether you have worked continental, four-on four-off or on-call, and its absence usually triggers a phone call that could have been avoided.
- Quoting downtime savings with no baseline. "Reduced downtime by 40 percent" means nothing without the before figure or the period it covers.
- Claiming HV experience loosely. Say whether you were authorised, for which voltage, and by whom, because this is checked at interview and an overstatement ends the process.
- Leaving out the CMMS. If your planned work was never recorded in a system, a maintenance manager will assume the paperwork discipline is missing too.
Electrical Maintenance Engineer Resume FAQs
The questions candidates most often search before writing this resume:
Lead with electrical fault diagnosis, PLC and drive fault-finding, three-phase motors and control panels, safe isolation, and planned preventive maintenance. Name the platforms rather than the category, so Siemens S7 and Allen-Bradley ControlLogix instead of "PLC systems". Add reliability skills such as condition monitoring and root cause analysis if you want to be read at engineer level rather than technician level.
Two pages is standard once you have more than five years on plant. One page cannot hold the equipment list, certifications and project work that maintenance managers screen for, and a third page usually means old apprenticeship detail that could be reduced to a single line.
For UK roles, yes in practice. Most industrial employers treat 18th Edition (BS 7671) as a screening requirement for anyone working on fixed installations, and many add City & Guilds 2391 for inspection and testing. Put both in a certifications block near the top with the year you achieved them.
Give a before figure, an after figure and the period. "Cut unplanned electrical downtime on the packaging hall from 46 to 28 hours a month over two quarters" is credible; a bare percentage is not. If your site never measured it, use callouts per week, repeat failures closed out, or PM completion percentage instead.
The engineer resume owns strategy and outcomes, the technician resume owns tasks. An engineer's page should show PM programme design, root cause analysis, asset replacement planning, reliability metrics and often the development of other technicians, alongside the hands-on diagnostic work.
Include it if you genuinely edit and download code, and be precise about how far you go. There is a real difference between interrogating a program to find a fault, modifying existing ladder logic, and writing a new program from scratch, and interviewers will test which one you meant.
Around 12 to 15 years in full detail, then compress. Keep your apprenticeship on the page no matter how long ago it was, because time-served status still carries weight in this trade, but reduce it to the employer, the qualification and the dates.
Get Started With Our
Free Resume Creator today!
Free sign-up. No credit card required.
